BFMYK - GC-408 CLASS A
- MSDS: BFMYK
- Manufacturer: GOAL CHEMICAL SEALANTS CORP
- Product Name: GC-408 CLASS A
- National Stock Number: 8030-00-753-2004
Product Identification
Product ID:GC-408 CLASS A
MSDS Date:01/01/1985
FSC:8030
NIIN:00-753-2004
MSDS Number: BFMYK
Responsible Party
Emergency Phone: (213)269J-0461
Cage: 04011
Contractor
Telephone: 213-269-0461
Cage: 04011
Ingredients
CALCIUM CARBONATE (MARBLE) (LIMESTONE)
CAS: 1317-65-3
RTECS: EV9580000
Fraction By Weight: 31.2%
OSHA PEL 15 MG/M3 TDUST
ACGIH TLV: 10 MG/M3 TDUST; 9192
POLYSULFIDE
Fraction By Weight: 56.2%
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 12.6%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
THIRAM (SARA III)
CAS: 137-26-8
RTECS: JO1400000
Fraction By Weight: 0.2%
OSHA PEL 5 MG/M3
ACGIH TLV: 1 MG/M3; 9192
EPA Report Quantity: 10 LBS
DOT Report Quantity: 10 LBS
MANGANESE DIOXIDE (AS MANGANESE)
CAS: 1313-13-9
RTECS: OP0350000
OSHA PEL C,5 MG/M3/1 FUME TWA
ACGIH TLV: 5 MG/M3 DUST/1 FUME
Hazards
Effects of Overexposure:MAY CAUSE EYE OR SKIN IRRITATION OR DIZZINESS
First Aid
First Aid:FLUSH AFFECTED EYE W/WATER & CONSULT MD. WASH AFTER EACH USE
W/ SOAP & WATER.
Fire Fighting
Flash Point:170F OC
Extinguishing Media:CO*2,H*2O, ETC.
Fire Fighting Procedures:NO SPECIAL PROCEDURES
Unusual Fire/Explosion Hazard:NO UNUSUAL HAZARDS
Accidental Release
Spill Release Procedures:GENERAL CLEAN UP SCRAPE UP EXCESS MATERIAL,
CLEAN RESIDUE W/SOLVENT
Handling
Handling and Storage Precautions:STORE BELOW 80F.
Exposure Controls
Respiratory Protection:RECOMMENDED-SOLVENT VAPORS. USE NIOSH/MSHA
APPRVD RESP DEVICE
Ventilation:MFR RECM LOCAL EXHAUST
Protective Gloves:RECOMMENDED
Eye Protection:RECOMMENDED
Other Protective Equipment:NO SPECIAL EQUIP. BESIDES ABOVE.
Supplemental Safety and Health
THE DRYING TIME VARIES FROM 1/2 HR. TO 2 HRS. DEPENDING ON THE AMT OF
MANGANESE DIOXIDE ADDED TO THE PRODUCT.
Chemical Properties
HCC:V4
Appearance and Odor:LIGHT TO DARK GRAY WHEN MIXED; MERCAPTAN
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:TEMP.ABOVE 300F
Hazardous Decomposition Products:SULFUR COMPOUNDS, SO*2 GASES ETC.
Conditions to Avoid Polymerization:TEMP.ABOVE 300F
Disposal
Waste Disposal Methods:MFR RECM GENERAL TRASH DISPOSAL.DISPOSE IAW
FED.,STATE & LOCAL CODES.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.